Medical Plaster Making Hot Melt PSA High Tack Waterproof Sweat Proof Glue
Features
This item is a synthetic rubber based hot melt pressure sensitive adhesive specifically developed for medical tapes, plasters and bandages applications.
The product is featured high tack, peel, and good penetration and wettability to various substrates, and with good ageing performance.
Suggested Uses
Medical tapes, plasters and bandages to various substrates.
Other pressure sensitive adhesive applications that high bond strength and tack are required.
Technical data
| Appearance : | Light yellow translucent solid |
| Color (Gardner) : | ≤ G5 |
| Softening Point : | 110 ℃ |
| Viscosity (Brookfield) : | @160 ℃ 12,000 cps |
Operating Guide
The material can be applied by slot or roll coating applicators. Suggested operation temperature is 150 – 1800C
for both, depending on machines, substrates, and plant conditions.
Package
6.25kg or 1kg block wrapped with siliconized release paper, 25kg/box.
Please consult the sales representative for special requirements.
Storage & Shelf life
The material can be stored indoor for 24 months from the date of manufacture in its original packages under dry
and clean conditions at ambient temperature below 35℃ and above 5℃.
Direct sunlight and moisture condensation must be prevented.
Operating precautions
Do not mix with other adhesives to prevent contamination.
The material is applied hot. Appropriate personal protective clothing and eye protection are strongly recommended to prevent burns.
Adequate ventilation is suggested to remove any vapors or fumes generated.
Rotate stocks and using the oldest stock first.
