Shanghai Jaour Adhesive Products Co.,Ltd
Corporation Mission：Bring bonding to be more valuable, make life become more healthy. Vision: To be a world-class HMPSA manufacturer. Belief: To be the strongest team with consistent high performance.
Add to Cart
Hot Melt Gum Glue For Making Foam Tape Filament Tape Craft Paper Tape
Product description
It is a synthetic rubber based hot melt pressure sensitive adhesive specifically developed for tape applications where good permanent adhesion is required.
The product is featured high tack and peel, good wetting to substrates and oil resistant.
Technical data
| Appearance : | Yellow translucent solid |
| Color (Gardner) : | ≤ G6 |
| Softening Point (R&B) : | 100℃ |
| Viscosity (Brookfield) :@160℃ | 10,000 cps |
Operating guide
The material can be applied by slot or roll coating applicators. Suggested operation temperature is 150 – 1800C for both, depending on machines, substrates, and plant conditions.
Package
6.25kg or 1kg block wrapped with siliconized release paper, 25kg/box or 180kg fibre drum. Please consult the sales representative for special requirements.
Storage condition
The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original packages under dry and clean conditions at ambient temperature below 35℃ and above 5℃.
Direct sunlight and moisture condensation must be prevented.
Operating Precautions
Do not mix with other adhesives to prevent contamination. The material is applied hot. Appropriate personal protective clothing and eye protection are strongly recommended to prevent burns. Adequate ventilation is suggested to remove any vapors or fumes generated. Rotate stocks and using the oldest stock first.
